LABPLANT
Lab Plant UK is the UK's leading manufacturer of spray dryers and refrigerated immersion probes (chillers). We specialize in scientific laboratory equipment and can help you source comprehensive supplies for your research needs. Lab Plant UK offers custom glassware and additional services such as contracts, calibrations, and repairs, and is your trusted partner for all scientific supplies.
Asphalt Content Furnace
A proven ignition method for determining asphalt content.
Test larger samples and reduce labor and costs with the Thermo Scientific™ NCAT Asphalt Content Oven, which uses a cost-effective and environmentally friendly ignition method to determine asphalt content by eliminating the cost of solvent and its disposal.
Versatile Distillation System
A versatile distillation apparatus with high separation efficiency. Suitable for solving difficult separation problems and for the production of pure substances, high-molecular-weight aromatic compounds, fatty acids, etc. The system is supplied with a packed column with wire mesh packing and, optionally, with a concentric tube column, which can be alternatively applied according to requirements.
Budget request
Ultra-Fast Distillation System
PILODIST presents the new QUICKDIST 500 CC as a fully automated ultrafast distillation or fractionation system for stabilized hydrocarbon products. It has been specifically developed for the separation of hydrocracked product samples or catalysts into their various fractions.
ASTM D892 - D6082
Apparatus (air bath module) for evaluating the foaming characteristics of lubricating oils. Model FT-D892-A-C/H: Single air bath module for measuring the foaming tendencies of lubricating oils in the temperature range of +24°C, 93.5°C, and +150°C. To improve the consistency of results, each module is equipped with a mass flow controller and totalizer.
Budget request
ASTM D1401
Apparatus for the Evaluation of Water Separability of Petroleum Oils and Synthetic Fluids Model WS-D1401-L-7: Seven-position test apparatus that meets all requirements of ASTM D1401 and related water separability (demulsibility) methods.
ASTM D8277 | AFNOR NEF E48-690/691
Automatic hydraulic oil filtration tester in compliance with ISO 13357. Model HFLT-AFNOR-AT-2/4: Automatic hydraulic oil filtration tester. Models available with 2 or 4 test positions. Each position is independently controlled by a Windows-based touchscreen PC.
ASTM D8277 | AFNOR NEF E48-690/691
ISO 13357 | NF E48-691 Manual hydraulic oil filterability test apparatus. Model HFLT-AFNOR-M-2: Manual hydraulic oil filterability test apparatus, available in two test positions, each position independently controllable.
ASTM D2983
Liquid bath viscometer for measuring low-temperature viscosity of automatic transmission fluids, hydraulic fluids, and lubricants using a rotary viscometer. Model: LTRV-D2983-L-10. Programmable liquid bath with a rotary viscometer for measuring low-temperature viscosity. 10-position model available.
Budget request
DKA A&B CEC L 48
Apparatus for determining high-temperature oxidation stability for ATF and gear oil. Model OXY-DKA-IHT-X: Manual single-heated tube (DRY) apparatus for the oxidation stability of ATF and gear oil. 4-, 6-, and 8-position models equipped with rotameter/MFC are available.
ASTM D943
Apparatus for determining the oxidation characteristics of various industrial lubricants/oils (MFC models). Model OXI-X-IHT-X: Manual, single-heated tube (DRY) apparatus for determining the oxidation stability of various industrial lubricants/oils. Available in 2-, 4-, 6-, and 8-position models.
ASTM D130
Copper Strip Corrosion Test Apparatus (Cube Procedure). Model CSC-D130-B-8: Manual dry aluminum block apparatus for cylindrical procedures. 8-position model available.
DIN 51 351
Apparatus for determining the fall point of refrigerant oils. Model FLCK-DIN-L-9: Low-temperature liquid bath with mechanical agitation, with capacity for 9 test tubes, in accordance with DIN 51 531, test method for determining the fall point (compatibility) of refrigerants with refrigerant oils. Operating temperature: 15 °C to -70 °C.
ASTM D445
Apparatus for measuring the kinematic viscosity of transparent and opaque liquids (and calculating dynamic viscosity). Model HTKV-D445-L-7: Manual high (40 °C to 150 °C) and low (-20 °C to -65 °C) temperature liquid bath for determining the kinematic viscosity of both transparent and opaque liquid petroleum products.
Aquamax Titrator KF
Aquamax KF Plus titrators have been specifically designed for the determination of water content, combining coulometry with the Karl Fischer method. The versatile Aquamax KF Plus is suitable for a wide range of applications and offers many advantages including a tough measuring vessel, a 'press go' keypad and built-in printer.
Budget request